Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Paloma Creek, TX
Most chimney work in Paloma Creek isn’t masonry work at all. Nearly every home in this master-planned subdivision off US 380 went up in the early 2000s with a factory firebox and a metal flue inside a framed chase, so the first thing a technician needs to establish is what kind of appliance you actually have – and whether it’s rated for what’s burning in it. That identification step sits at the front of every Chimney Inspection we do here, and it’s often the most useful part of the visit. Call (888) 424-2086 to book one.
Why Paloma Creek Homes Are Different
Paloma Creek isn’t an old town with brick stacks and tuckpointed mortar joints. It’s a planned subdivision on the Dallas North Tollway growth corridor in far north Denton County, built out largely through the 2000s and 2010s with builder-grade construction. The typical chimney here is a 25-to-40-foot exterior framed chase with a termination cap on top and a factory flue running down through it. Plenty of those original flues are now 15 to 25 years old and reaching the end of their service life.
The climate shapes the calendar too. From roughly April through October the fireplace sits idle, which means creosote and soot get months of undisturbed time to cure onto the flue walls while summer heat and UV work on the chase cover and flashing up top. Then the first genuinely chilly night arrives, homeowners light up, and problems surface all at once – soot smell, nests, a cap that’s worked loose. North Texas winters are mild enough that the burning season is short and concentrated, which is exactly why a booked inspection before it starts beats a scramble in the middle of it.
The other wrinkle is built into the housing stock. Many Paloma Creek homes have gas-log or direct-vent fireplaces that still look like a traditional wood-burning box. Homeowners reasonably assume they can burn wood in them, or run the gas log and expect a masonry-style sweep. Neither assumption holds, and the appliance-ID check is where we start.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Paloma Creek Services
Two calls come up again and again from homeowners here: a cleaning before the burning season, and a repair once the inspection turns up something that needs fixing.
Chimney Sweep in Paloma Creek
Cleaning a prefab or direct-vent system is a different job from brushing a masonry flue. We match the method to the manufacturer’s rating so the flue isn’t damaged by the wrong tool, pull the firebox components where they’re serviceable, and clean the smoke chamber the way that specific unit calls for. In Paloma Creek the summer shutdown means creosote gets a long quiet stretch to harden, so a fall cleaning often removes more than a homeowner expects. Chase cover and termination cap get checked at the same time. You can see the full scope on our Chimney Sweep in Paloma Creek page.
Chimney Repair in Paloma Creek
Repair here usually means chase and termination work rather than brick: a rusted-out cap, failed flashing where the chase meets the shingles, a firebox panel that’s cracked, or a flue liner that’s outlived its factory rating. Because these are framed chases with metal flues, the fix comes from the materials the flue was designed around – a DuraFlex flexible liner system or a HeatShield ceramic resurfacing where the flue is sound enough to restore rather than replace. Water intrusion at the cap is the most common thing we’re called back for. The details live on our Chimney Repair in Paloma Creek page.
Chimney Inspection in Paloma Creek
Chimney Inspection in Paloma Creek starts with a question most homeowners never think to ask: what is this appliance actually rated to burn? With fireboxes now 15 to 25 years old and a long idle summer behind them, the factory components, chase cover, and flue are exactly where the problems hide. Our Chimney Inspection is built around answering that question with evidence you can see, not a sales pitch.
We work the full sweep-to-repair cycle, so the person inspecting is the person who can explain what a repair involves and which materials – Famco, Copperfield, DuraFlex, HeatShield – actually fit your unit. Inspections are available as a standalone service, not something bundled onto a cleaning as an upsell.
Fireplace Inspection
Signs you need it
You’re not sure whether your gas-log or direct-vent fireplace is rated for wood, or you’ve noticed the firebox panels looking cracked, warped, or discolored.
What it costs in Paloma Creek
A fireplace inspection in Paloma Creek typically runs $99-$250, with the written estimate setting the final price.
How we do it
We identify the appliance by its data plate and rating, examine the firebox, grate, damper, and glass, then document what we find with photos so you can see the condition for yourself.
Chimney Flue Inspection
Signs you need it
A smoky smell that lingers through the summer, weak draft when you light a fire, or visible soot and creosote buildup you can reach from the firebox.
What it costs in Paloma Creek
Flue inspection in Paloma Creek usually falls in the $99-$250 range, and the estimate you receive in writing is what you pay.
How we do it
We run a camera down the flue to map creosote staging, cracks, gaps at the joints, and obstructions like nests, then show you the footage and explain what it means.
What Chimney Inspection Costs in Paloma Creek
Inspection pricing depends on which level of inspection the job calls for and how accessible the flue is from the roof or firebox. The ranges below are typical for Paloma Creek.
| Item | Typical range in Paloma Creek |
|---|---|
| Level 1 chimney inspection | $99-$199 |
| Level 2 chimney inspection (camera) | $150-$350 |
| Fireplace and appliance ID check | $99-$250 |
Do I need a Level 2 chimney inspection in Paloma Creek?
A Level 2 with camera is worth it here when you’ve changed appliances, noticed a draft problem, or the flue is 15 to 25 years old and never been scoped. It covers the flue interior a Level 1 can’t reach.
What actually happens if I skip the inspection?
Creosote keeps building, a cracked firebox panel goes unnoticed, and a loose chase cover lets water into framed construction – all things you can’t see from the hearth. Call (888) 424-2086 and we’ll tell you honestly whether work can wait.
Brands We Service in Paloma Creek
Our recommendations are built around what’s actually available and appropriate: DuraFlex flexible liner systems, HeatShield ceramic flue resurfacing, Famco, and Copperfield components. We work with the materials chimney engineers specify rather than whatever a generalist happens to carry. Because we don’t hold stock, parts are sourced per job, which usually adds a short lead time between diagnosis and repair. See the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Paloma Creek, TX
| Service | Typical range in Paloma Creek |
|---|---|
| Level 1 chimney inspection | $99-$199 |
| Level 2 chimney inspection (camera) | $150-$350 |
| Fireplace and appliance ID check | $99-$250 |
| Standard chimney sweep | $150-$300 |
| Sweep with inspection | $250-$450 |
| Termination cap replacement | $200-$450 |
| Chase cover repair | $300-$700 |
| Firebox panel replacement | $350-$900 |
| Flexible liner installation (DuraFlex) | $1,800-$3,800 |
| Ceramic flue resurfacing (HeatShield) | $1,200-$2,800 |
What pushes price up in Paloma Creek is access – a steep pitch or a chase that needs staging runs higher than a straightforward roofline – along with the size and condition of the flue and whether the factory components are still available. We give you the price upfront in writing before any work begins, and that number is what you pay.
Neighborhoods We Serve in Paloma Creek
We schedule Paloma Creek visits across the subdivision’s planned sections, and because the housing stock was built to similar specs, we’re familiar with the chase and firebox layouts before we arrive. One scheduling note for the whole area: the fall window fills first as homeowners fire up for the season, so booking ahead of that gets you a better slot. Call (888) 424-2086 to check availability.
- Paloma Creek subdivision sections off US 380
- The Dallas North Tollway corridor
- Streets around the Paloma Creek community center
- Homes backing onto the greenbelt and drainage areas
Service Area – Cities Near Paloma Creek
Paloma Creek sits in far north Denton County, and our coverage extends to the surrounding communities along the US 380 and tollway corridor. Homeowners in Oak Point, TX, Hickory Creek, TX, Lake Dallas, TX, and Corinth, TX all get the same inspection-first approach. Call (888) 424-2086 for a free estimate.
Serving Paloma Creek, TX – Our Local Coverage Area
We serve Paloma Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Paloma Creek
We book Paloma Creek visits into the next available opening, typically within a few business days. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Call (888) 424-2086 for a free estimate.
Most Paloma Creek subdivisions are HOA-governed, and changes to a chase exterior can require approval, so check with your HOA and the local building department. Standard inspection and cleaning generally don’t require a permit. Call us to confirm what a repair will involve first.
We work throughout Paloma Creek and the neighboring north Denton County communities, including Oak Point, Hickory Creek, Lake Dallas, and Corinth. If you’re unsure whether your address falls in our coverage, call (888) 424-2086 and we’ll confirm.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paloma Creek Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Yolanda Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Novak"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Angela Tran