Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Paloma Creek, TX
We provide independent Gelco service across Paloma Creek, and the thing that makes our Gelco work here different is that we treat your chimney as what it actually is: a factory metal flue inside a framed chase, not a masonry stack. Most homes in this part of far north Denton County were built with a manufactured firebox, so a Gelco cleaning here starts with identifying the appliance before anything gets swept. If you’ve had smoke roll into the room on the first cold night, that ID step is the one that matters most. Call (888) 424-2086 and we’ll get you booked. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Paloma Creek Residents Choose Us for Gelco Service
Gelco fireboxes and termination caps are common equipment in this corridor, and we’ve worked on enough of them to know where they fail. Our technicians have up to 14 years of experience reading factory rating plates, tracing component layouts, and telling the difference between a prefab wood-burning box and a direct-vent gas unit that was never designed to see flame from a log.
We’re an independent service provider, not affiliated with or authorized by Gelco, and that independence is the point. We recommend OEM Gelco-rated parts where the factory rating depends on them, and we’ll say so plainly when a universal aftermarket cap or screen does the job just as well. Every visit pairs a Level 2 inspection with the cleaning, because a sweep without an inspection misses heat-cycling damage hiding behind the firebox liner.
Booking is straightforward. Tell us what your fireplace looks like, we’ll confirm the appliance type, and we set a window that works around your week. No coordinating between a sweep company and a repair contractor, since we handle the full sweep-to-repair cycle ourselves. See how our Paloma Creek service works before you book.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Paloma Creek
- Wood burned in a gas-log or direct-vent Gelco unit. Direct-vent and gas-log fireboxes are sealed-combustion systems. Burning real wood in one damages the firebox liner, voids the factory rating, and puts combustion products where they don’t belong. This is the single most frequent issue we find in Paloma Creek, because many of these units look exactly like a traditional wood-burning box.
- Chase-cap and flashing gaskets baked by UV and summer attic heat. North Texas summers are hard on the cap assembly bolted to a framed chase. The gaskets dry out, rain finds its way down the chase, and metal flue joints start to rust. A loose cap also lets water in from the top, which is why cap replacement is often the fix.
- Creosote and soot flaking loose after the idle season. The fireplace sits quiet from roughly April through October. Soot and creosote build-up sits undisturbed through that stretch, then breaks free on the first fall fire and clogs the flue screen. That’s when the smoke backs up.
- Original factory flues showing their age. On 15-25-year-old Gelco boxes, we look for seam separation, sagging flue sections, and a termination cap that’s come loose after years of heat cycling. These are the failures a Level 2 inspection is built to catch.
- Nests packed into the top of the chase. Birds and squirrels love an idle chimney. A nest sitting on top of the flue screen goes unnoticed until the first fire of the season sends smoke into the living room instead of up the flue.
Gelco Service in Paloma Creek: What Local Conditions Mean for Your Equipment
Paloma Creek is a master-planned, early-2000s subdivision on the US 380 and Dallas North Tollway growth corridor, and that build date is the story. Those builder-grade Gelco fireboxes are now at the 15-25-year mark, and the original factory flues are approaching the end of their service life. That means the first visit to a home in subdivisions off US 380 is often an appliance-ID check before any cleaning begins, and it’s necessary, because quite a few homeowners here have been burning wood in a gas-rated box without realizing it. The factory rating plate tells us what the unit actually is; the component layout confirms it. From there, cleaning can be done to the manufacturer’s rating rather than a generic assumption about what a chimney is. In a typical Paloma Creek home, a homeowner lights the first fall fire in a Gelco firebox that’s sat idle since spring and gets smoke rolling into the room. Often it’s a nest or creosote flake blocking the cap screen, or a chase cap that UV and attic heat have loosened. A qualified technician reads the plate, confirms prefab wood-burning versus direct-vent gas, cleans the metal flue to spec, resecures or replaces the termination cap, and checks the firebox liner and damper for heat-cycling damage before calling it safe to burn.
Gelco Models & Products We Service in Paloma Creek
We work on the Gelco equipment that actually ended up in Paloma Creek homes: direct-vent gas fireplaces with a factory sealed-combustion box, prefab wood-burning fireplaces with a factory metal flue, gas-log inserts sitting in a builder-grade firebox, and multi-flue termination cap and chase-cover assemblies. Each takes a different approach, and the cleaning has to match the rating of the appliance.
Parts matter too. Where the factory rating depends on it, we specify OEM Gelco-rated liners, caps, dampers, and gaskets. For universal caps and screens, quality aftermarket parts are fine and we’ll tell you so. Our Gelco page covers the equipment in more depth. What we won’t do is mark up a part because a manufacturer’s name is on the box.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Paloma Creek
We don’t publish flat prices because the price is set per job by the written estimate. What drives the cost: appliance type, how much creosote and soot has accumulated, whether the termination cap needs resecuring or full replacement, and whether the inspection turns up liner seam damage or a compromised firebox shell. A direct-vent unit that only needs cleaning sits at one end of the range; a prefab box with a loose cap, a clogged screen, and heat-cycling damage at the liner sits at the other.
The estimate is free. It includes the appliance-ID check, a Level 2 inspection, and a written scope of what needs doing. If work can safely wait, we’ll say so. If a firebox shell or flue seam is compromised, we’ll recommend replacement of the appliance rather than sell a cleaning that won’t make it safe. Call (888) 424-2086 to schedule a free estimate. We answer 24/7.
Serving Paloma Creek, TX – Our Local Coverage Area
We serve Paloma Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Paloma Creek
No. Gas-log and direct-vent Gelco units are not rated for solid fuel, and burning wood in one damages the firebox liner and voids the factory rating. That’s exactly the scenario our appliance-ID check is built for. We read the rating plate before we light or sweep anything, so you know what you actually have.
North Texas UV and summer attic heat dry out the cap’s gaskets and flashing over time, and a 25-to-40-foot exterior framed chase takes the full swing of that. Once the gaskets fail, the cap works loose and rain gets into the chase, which rusts the metal flue joints. Resecuring or replacing the cap is usually the fix, and our Oak Point-area and Paloma Creek crews check the cap on every visit.
For most prefab wood-burning boxes here, once a year is the standard, timed to the fall season before you start firing. If your Gelco unit is gas-log or direct-vent, cleaning intervals differ since there’s no wood creosote. The right answer depends on appliance type, which we confirm on the first visit. Call (888) 424-2086 for a free estimate.
A Level 2 inspection on a Gelco direct-vent unit checks the sealed-combustion box, the factory flue, the termination cap, the firebox liner, the damper, and the chase cover and flashing. On a sealed-combustion system, the inspection focuses on whether those seals are intact. That’s where a direct-vent failure shows up first.
Sometimes it can be repaired, sometimes it needs replacing. On a 15-25-year-old factory firebox, if the shell or flue seams are compromised, replacement of the appliance is the safer call. Where the damage is limited to a component, we look at OEM Gelco-rated parts that fit. We won’t recommend replacement unless the inspection and photos back it up, and you’ll see the evidence yourself. Call (888) 424-2086 for a free estimate. We answer 24/7.
Service Areas Near Paloma Creek
We also serve homeowners in Lewisville, Hickory Creek, The Colony, Highland Village, and Lake Dallas, along with neighborhoods throughout the US 380 and Dallas North Tollway corridor. Our Hickory Creek page covers nearby Gelco service. If you’re not sure whether your address is inside our range, a quick call settles it.
Book Your Gelco Service in Paloma Creek Today
Whether your Gelco firebox needs a fall cleaning, a Level 2 inspection, a new termination cap, or a creosote removal, the next step is a free written estimate. Call (888) 424-2086 and we’ll confirm your appliance type and set a booking window that works around your week. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturdays.
Written by the team at Lewisville Chimney Sweep.