Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Corinth
If you live in Corinth, Texas, and your fireplace is spilling smoke, your damper won’t seal, or the brickwork on your chimney is starting to flake, we can help. We connect Corinth homeowners with independent local chimney professionals who handle everything from tuckpointing to full chimney rebuilding, and we work with the same professional-grade materials that chimney engineers specify. Our technicians have up to 14 years of experience, and they’ve worked on the mix of factory-built and masonry chimneys you find throughout this town. To get started, call (888) 424-2086 for a free estimate.
Why Corinth Homeowners Call Lewisville Chimney Sweep for Chimney Repair
People in Corinth call us because we treat a chimney as a system, not a single pipe. A standard sweep won’t catch a cracked chase top or a short exterior flue that drafts poorly on still mornings, and those are exactly the problems we see most in the newer subdivisions here. Our inspections are camera-based, and we don’t recommend a repair unless you’ve seen the evidence yourself.
We’re also set up for the full cycle of work – sweep, inspect, and fix – so you’re not calling a second contractor to finish the job. That matters when a factory-built fireplace needs a manufacturer-specific damper or cap. We work with brands like DuraFlex, HeatShield, and Copperfield, so the repair recommendation is based on what’s actually available and appropriate for your unit. Our technicians have up to 14 years of experience, and we bring that diagnostic eye to every Corinth job. Estimates are free, and the written scope sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in Corinth
Chimney Repair Companies serving Corinth are handling a different kind of work than they were twenty years ago. Most of the housing stock here went up between the 1990s and 2010s, so what’s failing now is first- or second-generation equipment: prefabricated chases, factory-built fireplaces, and builder-grade caps that have reached the end of their service life. A typical repair visit starts with a Level 2 inspection to see what’s actually happening inside the chase, then moves to specific fixes like resealing a rusted damper, replacing a corroded chase cover, or addressing draft with a new cap or flue extension. Chimney repairs in Corinth typically run $250 to $1,800 depending on scope, with larger rebuilds costing more.
Prefab Chase and Cap Repairs
On many Corinth homes, the chimney chase is a framed, sided box, not a brick stack. The metal cap on top is the first thing to fail. Once it rusts through or loses its seal, water gets into the chase, the firebox rusts, and the damper stops sealing. Resealing or replacing the cap is a small job that prevents a much bigger one.
Damper and Firebox Repairs
Factory-built fireplaces use manufacturer-specific dampers, and an original damper from a 1990s or 2000s unit often no longer seats properly after years of heat cycling. A damper that won’t close means heat loss up the flue and cold air back down. We match the replacement to the firebox rating, not a generic part.
Chimney Masonry Repair in Corinth
Chimney Masonry Repair in Corinth mostly centers on the brick and mortar that surround a firebox, and on the crown at the top of a masonry stack. In this climate, the freeze-thaw cycle isn’t the main enemy – it’s the long, mild, humid stretches between cold snaps, which let water sit in hairline cracks and mortar joints and slowly break them down. When mortar joints start to recede, repointing restores the weather seal without tearing the chimney down. When the crown cracks or spalls, resurfacing or rebuilding it keeps water out of the flue. Masonry repairs here typically run $400 to $2,500 depending on scope, with a full rebuild costing more.
Repointing and Tuckpointing
Repointing is grinding out the old, failed mortar and packing in new material that matches the original. Tuckpointing is the same process with a finished look, where the new joint is shaped to stand slightly proud and match the brick color. On Corinth’s 1990s and 2000s masonry chimneys, this is usually the first significant repair the stack needs.
Crown and Flashing Repair
The crown is the concrete cap on top of a masonry chimney, and it takes the most weather of any part of the stack. A crack in the crown lets water run straight down into the flue lining. Flashing is the metal seal where the chimney meets the roof – when it lifts or rusts, water gets into the attic side of the chase. Both are fixable without a rebuild if caught early.
Trusted Brands We Service in Corinth
We work with DuraFlex flexible liner systems, HeatShield ceramic flue resurfacing, Copperfield caps and chase covers, Olympia Chimney products, Famco, and Gelco. Those are the names chimney engineers and certified specialists specify, and they matter here because most Corinth fireplaces are factory-built units that need a manufacturer-appropriate part rather than a universal fit. We don’t stock parts in a warehouse, but we know what’s appropriate for your unit before we ever quote the repair, which keeps the turnaround on a Corinth chimney job tight. HeatShield-familiar technicians can also perform flue resurfacing, which is one of the more technical repair options on the table.
Common Chimney Repair Problems We See in Corinth Homes
- Cracked prefabricated chase tops: On Corinth’s newer homes, the metal chase cover on top is the first thing to go. Once it cracks or rusts through, water gets inside the chase and starts rusting the firebox and damper from the top down.
- Short exterior flues that draft poorly: The distinctive hook in Corinth’s newer subdivisions like Oakmont and The Hills is that many chimneys sit on exterior walls with short flues. On still, damp winter mornings, the flue is cold and the draft is weak, so smoke spills into the room and creosote accumulates faster because the fire isn’t burning cleanly.
- Glazed third-degree creosote: Because North Texas winters are mild, most Corinth fireplaces are used only a few times a year. That intermittent use lets creosote sit and harden between burns, and a sudden cold snap can push a heavy fire through a flue that already has a glaze layer inside it.
- Obsolete or failed factory-built parts: Original dampers and caps on 1990s and 2000s prefab units often no longer seal. A damper that won’t close loses heat up the flue and lets cold air back down, and a cap that’s lost its screen or seal lets water and animals in.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Corinth, TX
We don’t have a single flat price for chimney repair because the range of work is too wide. What we can tell you is what typical jobs in Corinth run: a chase cover replacement is usually $250 to $650, a damper repair or replacement is $200 to $550, masonry repointing runs $400 to $1,200 depending on linear footage, crown repair or rebuilding is $350 to $900, and a partial chimney rebuild starts around $1,500 and climbs from there. The written estimate sets the final price, and the estimate itself is free. Call for an exact quote – estimates are free.
We Also Serve Cities Near Corinth
We serve homeowners throughout the area, including Hickory Creek, Lake Dallas, Flower Mound, and Highland Village. If you’re in one of these nearby towns and need chimney work, the same professional-grade materials and diagnostic approach apply. Learn more about our chimney repair services or read more about Corinth.
Serving Corinth, TX – Our Local Coverage Area
We serve Corinth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Corinth
Smoke spillage in a newer Corinth home is usually a draft problem, not a firebox problem. Many chimneys in the newer subdivisions sit on exterior walls with short flues, and on still, damp winter mornings the flue is cold and the draft is weak, so smoke pushes back into the room instead of going up. A draft-improving cap, a flue extension, or addressing the firebox-to-flue sizing usually fixes it. Call (888) 424-2086 for an exact quote – estimates are free.
Third-degree creosote is the glazed, hardened layer that forms when creosote is heated repeatedly and polymerizes into a tar-like coating. It’s a concern in Corinth because mild winters mean fireplaces here are used only a few times a year, which lets creosote sit and harden between burns, and then a cold snap pushes heavy use through a flue that’s already coated. A standard sweep won’t remove it. Call (888) 424-2086 for an exact quote – estimates are free.
A factory-built fireplace should be inspected once a year, and that holds even if you’ve only burned a few fires. The reason is that the parts most likely to fail on a Corinth prefab unit – the chase cover, the damper, the cap – are out of sight from the living room. An annual inspection catches a cracked chase top or a failed damper before water gets into the firebox. Call (888) 424-2086 for an exact quote – estimates are free.
Yes. On a prefabricated fireplace, the damper has to match the firebox rating, so a generic replacement isn’t appropriate. We look up the manufacturer-specific part, confirm the firebox is still sound, and quote the swap. Most damper repairs in Corinth run $200 to $550. Call (888) 424-2086 for an exact quote – estimates are free.
Call for an inspection before you do anything else. A spalling crown is a concrete cap that’s flaking or breaking apart, usually from water getting into hairline cracks and then drying and shrinking repeatedly. Left alone, it lets water run straight down into the flue lining. Crown repair or rebuilding in Corinth typically runs $350 to $900. Call (888) 424-2086 for an exact quote – estimates are free.
Contact Us
If you’re in Corinth and your fireplace is smoking, your damper won’t seal, or you’re seeing cracks or spalling on the stack, call Lewisville Chimney Sweep at (888) 424-2086 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, show you what’s actually happening, and give you a written price before any work starts.
Written by the team at Lewisville Chimney Sweep.