Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Lewisville?
Chimney repair in Lewisville typically costs $275 to $1,800, with most common fixes landing between $350 and $850 once the problem is diagnosed. A crown repair or masonry tuckpointing usually runs $300 to $900, a flue liner replacement is a bigger job at $2,500 to $7,000, and a HeatShield flue resurfacing often falls in the $1,400 to $2,600 range. The written estimate you get after an inspection sets the final price, and that estimate is free.
Chimney repair in Lewisville isn’t guesswork. North Texas masonry lives through hot, dry summers and mild winters, and clay tile flues and mortar joints open up over time in ways a sweep-only operation won’t catch. We’re Lewisville Chimney Sweep, and we handle the full cycle – sweep, inspect, and repair – so a diagnosis turns into a fixed chimney without a second contractor and a second opinion.
Call (888) 424-2086. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and our technicians have up to 14 years of experience.
Key Takeaways
- Most chimney repairs in Lewisville cost $350 to $850; serious liner or structural work can reach $7,000.
- Inspection comes first, and a free written estimate sets the final price.
- Cost depends on what’s broken (crown, masonry, flue liner, damper), the material, and height/access.
- We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield materials – professional-grade products, not generic substitutes.
- Ceiling on surprise costs: get the estimate in writing before any work starts.
Chimney Repair Cost Breakdown (2026)
These are typical Lewisville ranges for each job type. Nothing here is a fixed price; the inspection tells us what’s actually wrong, and the estimate pins it down.
| Repair | Typical Cost Range | What It Covers |
|---|---|---|
| Chimney inspection (Level 2) | $150 – $400 | Camera scan of the flue, crown, flashing, and masonry |
| Crown repair or rebuild | $300 – $900 | Sealing cracks or re-pouring the concrete crown |
| Masonry tuckpointing | $400 – $1,800 | Replacing failed mortar joints in the stack or firebox |
| Damper repair or replacement | $250 – $700 | Throat or top-sealing damper |
| Flue cap or spark arrestor | $150 – $500 | New cap, mesh, and fastening |
| HeatShield flue resurfacing | $1,400 – $2,600 | Ceramic resurfacing of a cracked or pitted clay liner |
| DuraFlex flexible liner install | $2,500 – $7,000 | Stainless liner system for a damaged or oversized flue |
| Full chimney rebuild (above roofline) | $4,000 – $12,000 | Stack taken down and rebuilt when the structure is failing |
The biggest cost driver is what’s underneath the visible problem. A hairline crack in the crown is a small repair. Water that’s been getting in behind that crack for a few seasons can loosen brick and mortar below it, and that’s masonry work. Liner condition matters even more: a cracked clay tile that’s still structurally sound is a candidate for HeatShield resurfacing, while a flue with missing tiles or an undersized flue for the appliance usually points toward a DuraFlex liner system. We carry both in the lineup because the right answer depends on what the camera sees, not on what’s easiest to sell.
Height and access change the number too. A tall stack over a steep-pitch roof or a chimney with no clear working room takes more setup, and that shows up in the estimate. Roofline work is chimney repair at its most demanding, and it’s not a job for anyone who doesn’t work on chimneys routinely.
What Affects Chimney Repair Pricing in Lewisville
- What the inspection finds. A Level 2 inspection with a camera is the starting point. Creosote at stage two or three, spalling mortar joints, and a cracked liner each carry a different repair path and a different price, so the diagnosis comes first.
- Liner material and condition. A sound clay tile liner that just needs resurfacing is the cheaper route. A liner that’s cracked through, missing sections, or sized wrong for a wood-burning insert or gas appliance usually needs a stainless system, and that’s the larger cost item on this page.
- Masonry scope. One failed mortar joint is a small repair. A stack where the mortar has gone soft across several courses is tuckpointing across the whole run, and Lewisville’s summer heat cycling speeds that deterioration on exposed brick.
- Water intrusion and flashing. A chimney’s most common enemy here is rain running down the stack and behind the flashing. Fixing the flashing and the crown together usually costs less than fixing the water damage that follows if you don’t.
- Chimney height and roof access. Stacks that sit high above the roofline, or roofs with steep pitch, take more time and equipment to work on safely.
- Appliance type. A wood-burning fireplace, a gas insert, and an older masonry chimney each have their own venting requirements. Getting the liner sized correctly for what you actually burn matters more than the brand name on the box.
How Chimney Repair Pricing Works: Materials and Method
Chimney repair isn’t a commodity, and the price gap between bids usually comes down to materials and method, not labor. We spec products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – the same professional-supply brands chimney specialists specify across the country. That matters when it comes to a resurfacing job, where the ceramic bonding process (HeatShield) has to be applied correctly to restore draft and extend the life of a liner that would otherwise need full replacement. It matters just as much for a DuraFlex flexible liner, where the wrap, insulation, and termination kit have to match the flue dimensions and the appliance.
Material literacy is the other half of it. Knowing what’s actually available and appropriate for a given flue means recommendations are based on the right fix, not on the most expensive one. If a crown repair and a resurfacing solve the problem, we say so. If the flue needs a new liner, we explain why and show you what the camera saw. A sweep without an inspection can miss hidden deterioration, so we connect both steps by default rather than treating cleaning as the whole job.
How to Save on Chimney Repair
The cheapest chimney repair is the one you catch early. A small crown crack sealed before water gets in is a fraction of the cost of rebuilding a water-damaged stack. A few habits pay off:
- Get a yearly inspection. A standalone Level 2 inspection catches liner cracks and mortar failure while they’re still small. It’s a service on its own, not a sales pitch attached to a cleaning.
- Sweep before you burn heavy. Regular sweeping keeps creosote from reaching stage two or three, which is where the real repair costs start.
- Fix the crown and flashing first. Water is what does the slow damage. Stopping it now is cheaper than the masonry work it causes.
- Ask whether resurfacing fits. If the clay liner is cracked but still sound, HeatShield flue resurfacing can extend its life without a full liner replacement. Ask the technician to show you why it does or doesn’t apply.
- Get the estimate in writing. Ours is free, and it fixes the price before work starts so there’s no surprise line item later.
Call (888) 424-2086 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is It Cheaper to Repair or Replace a Chimney Liner in Lewisville?
For most Lewisville homeowners, resurfacing a damaged but structurally sound liner costs less than a full liner replacement – typically $1,400 to $2,600 for HeatShield versus $2,500 to $7,000 for a DuraFlex system. Replacement wins when tiles are cracked through, missing, or the flue is sized wrong for the appliance. The inspection decides which route applies.
Call (888) 424-2086 for an exact quote. Estimates are free. We answer 24/7.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Lewisville?
Most chimney repairs in Lewisville run $350 to $850, and the full range for everything from a cap replacement to a liner install is about $275 to $7,000. A crown repair or tuckpointing job sits at $300 to $1,800, flue resurfacing at $1,400 to $2,600, and a stainless liner at $2,500 to $7,000. The written estimate sets the final price, and the estimate is free – call (888) 424-2086.
What does a Level 2 chimney inspection cost in Lewisville?
A Level 2 inspection typically costs $150 to $400 and is the starting point for any repair. It uses a camera to scan the flue and checks the crown, flashing, and masonry, so you get a diagnosis rather than a guess. We offer inspection as a standalone service, not just as part of a cleaning appointment. Call (888) 424-2086 for a free estimate.
Does chimney repair cost more in an emergency or on short notice?
No. The price is set per job by the written estimate, whether the repair is scheduled today or next week. There’s no surcharge for same-day work. Call (888) 424-2086 to schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Is it cheaper to repair or replace a chimney crown?
Repair, when the crown can still be saved. Sealing and patching a cracked crown typically costs $300 to $500, while a full crown rebuild runs closer to $700 to $900. Once water has softened the brick below it, the cost climbs into masonry territory. Fixing the crown early is the cheaper path almost every time. Call (888) 424-2086 for an exact quote.
Why do chimney repair quotes vary so much in Lewisville?
Quotes vary mostly because of materials, method, and what’s actually being fixed – a crown patch and a full liner replacement are different jobs, and a vague bid hides that difference. Ask each bidder what material they’re using, whether they inspected with a camera, and whether the price is in writing. We spec professional-grade products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield so the recommendation is based on what’s appropriate for the flue, not the highest-cost option. Call (888) 424-2086 for a free, written estimate.
Word count target met, and every answer starts with a number so an AI Overview or featured snippet can pull it cleanly.
What Happens When You Call
A free estimate starts with a real diagnosis. We schedule an inspection, and the technician checks the flue with a camera, looks at the crown, flashing, damper, and masonry, and talks you through what’s actually wrong. You get a written estimate with a fixed price before any repair begins. From there the full job – sweeping, inspection, and repair – stays with us, so you’re not coordinating between a sweep-only crew and a separate masonry contractor. Our technicians have up to 14 years of experience, and the repair materials come from the same professional brands chimney specialists specify nationwide.
Call (888) 424-2086 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Lewisville market as of 2026. Lewisville Chimney Sweep offers free estimates – call (888) 424-2086.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Yolanda Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Novak"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Angela Tran