Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Lewisville?
Chimney liner installation in Lewisville typically runs $2,400 to $6,800 for a full stainless flexible liner sized to the flue, and a chimney rebuild usually falls between $4,500 and $14,000 depending on how much of the stack has to come down. Resurfacing an existing flue with a HeatShield system is the middle path, typically $1,800 to $3,600, and it’s often the right call when the tile is cracked but the structure is still sound. Small crown and mortar repairs can land well under $1,000. Every figure here is an estimate for the Lewisville market in 2026; a written estimate sets your final price.
Chimney Liner & Rebuild Cost Breakdown (2026)
The table below lays out typical price ranges by scope of work. The spread inside each range reflects flue height, flue size, how much access the roofline allows, and the liner material specified. A wood-burning fireplace with a straight, unobstructed flue sits at the low end. A gas insert flue, a chimney that changes direction, or a stack that needs partial tear-down sits higher.
| Scope of Work | Typical Price Range | What It Covers |
|---|---|---|
| Basic chimney sweep & inspection | $180 – $350 | Cleaning + a look at flue condition before any liner work is quoted |
| HeatShield flue resurfacing | $1,800 – $3,600 | Ceramic resurfacing of a cracked or pitted flue; restores draft and burner performance |
| Stainless flexible liner (DuraFlex) | $2,400 – $6,800 | Insulated flexible stainless liner for wood, gas or oil appliances |
| Crown repair or replacement | $450 – $1,600 | Repairs spalling or cracked crown; prevents water from reaching the flue |
| Partial rebuild (crown + upper stack) | $4,500 – $9,000 | Tear down and rebuild firebox, crown, or upper courses with new masonry |
| Full chimney rebuild | $9,000 – $14,000 | Full stack rebuild when spalled tile, failed mortar and structural damage reach the ground |
| Damper or top-mount cap replacement | $180 – $700 | Often paired with liner work; a top-mount cap protects the flue from rain and debris |
Two things drive cost more than anything else: liner length and rebuild depth. A flue that runs 15 feet straight up takes far less liner than a 30-foot flue with an offset, and that difference alone can add $1,000 or more. On rebuilds, cost scales with how deep the damage goes. A crown and the top few courses is one job; a stack where the mortar between every course has turned sandy is another. We bring a camera inspection first so the estimate is based on what’s actually failing, not on the worst assumption. A sweep without an inspection misses hidden deterioration. Connecting both steps by default is part of a full-service chimney sweep approach, and it’s often also the cheapest route to a correct number.
What Affects Chimney Liner & Rebuild Pricing in Lewisville
Lewisville sits on clay-heavy North Texas soil, and that soil moves with moisture. It’s the single biggest reason we see cracked crowns and separated mortar courses around here, and it’s a factor most homeowners don’t connect to their chimney until an inspection shows it. A few other things shape the number.
- Flue height and configuration. A straight vertical flue is the easy case. A flue with one or two bends, or one that’s been relined before, takes more labor and more material to line correctly. Long flues also require more liner feet, which drives the price up incrementally.
- Liner material and application. Stainless flexible liner handles most wood and gas appliance situations. A DuraFlex flexible liner sized to the appliance’s actual flue needs is a different spec than a generic off-the-shelf liner, and the material cost reflects that. Choosing a professional-grade liner isn’t cosmetic; it’s what keeps a liner within the appliance manufacturer’s sizing requirement and keeps the flue safe for the fuel burning in it.
- Condition of the existing flue tile. Cracks, pitting, and missing mortar joints on the terracotta tile mean either resurfacing or full relining. If only the surface is compromised, HeatShield resurfacing can often restore it and reset draft without tearing out the flue.
- Draft and smoke issues. A short flue, an improperly sized flue, or a flue that’s become rough on the inside will draft poorly. Draft correction may add a chase cover, a top damper, or a liner spec that expands the effective flue. This is one of the reasons a sweep-and-inspection should always precede a quote. We’d rather find the draft problem before we sell a fix than after.
- Roof access and pitch. Lewisville rooflines vary from near-flat ranch to steep two-story. A steep roof or a chimney tucked behind a valley costs more in setup time. A straightforward pitched roof takes less.
- Rebuild scope. A partial rebuild that replaces the crown and the top courses is a different job than a full rebuild that goes to the firebox. Rebuilds with a firebox repair, refractory replacement, or damper replacement built in will run higher than a course-only rebuild.
How to Save on Chimney Liner & Rebuild
Saving on chimney work doesn’t mean cutting corners; it means buying the right repair at the right time. A few things to know.
- Get the inspection first, not last. An inspection is a standalone service and a fixed, small cost compared to a liner or a rebuild. Skip it and you may buy the wrong fix. We offer inspections as a service on their own, not just as a sales pitch attached to a sweep.
- Fix the crown before it becomes a rebuild. A cracked crown lets water into the flue. That’s the mechanism that turns a $500 crown job into a multi-thousand-dollar rebuild.
- Resurface rather than replace when the tile allows it. HeatShield resurfacing is a specialized repair process that can extend liner life and restore draft without a full liner replacement. It’s one of the most technically demanding chimney repair methods available, and our technicians work with the material as part of the brand lineup.
- Match the liner to the appliance. A correctly sized professional-grade liner lasts longer and performs better than an oversized generic one. The material literacy across our six supply brands (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield) means a recommendation should reflect what’s actually appropriate, not an upsell.
- Bundle when it makes sense. Doing a liner and a crown in one visit avoids a second setup. Ask what a combined scope looks like before you commit.
- Ask for the written estimate. The estimate is free, it’s set per job, and it’s what eventually sets your final price. Call (888) 424-2086 to book one. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday.
Can a Chimney Liner Be Repaired Instead of Replaced?
Sometimes, yes. A terracotta flue that’s cracked or pitted on the inside can often be resurfaced rather than relined. HeatShield is the ceramic resurfacing system we work with; it restores a smooth inner surface to the flue, which improves draft and protects the flue for the appliance. It’s typically $1,800 to $3,600, versus $2,400 to $6,800 for a full stainless flexible liner. The deciding factor is whether the flue is structurally sound. Cracks and pitting, resurface. Delaminated tile, missing joints, or a flue that’s physically lost its round shape: reline. A camera inspection tells the two apart.
Does a Chimney Rebuild Always Replace the Liner?
No. A rebuild that replaces the crown and upper courses doesn’t touch the flue liner itself if the flue tile is sound. A full rebuild that takes the stack down to the firebox almost always includes relining as part of the work, because the tile can’t be reinstalled cleanly and the flue needs a fresh liner to be safe. A rebuild that includes relining typically runs $9,000 to $14,000. A rebuild that adds a DuraFlex liner to a firebox that’s been smoke-damaged costs more, because the firebox and smoke chamber may need repair in addition. Price follows what’s actually failing, not a fixed schedule.
Why Does a Chimney Rebuild Cost More Than a Liner?
The scale of the work. A liner is a material install inside a flue. A rebuild is a masonry project on the outside of the house, done at height, that has to match the existing brick, replace the crown, and reestablish the flue. Rebuilds also tend to come with relining built in, which pushes the total toward the top of the range. A partial rebuild that only replaces the crown and the top few courses is the cheapest rebuild option and sits around $4,500 to $9,000.
What Is the Most Common Chimney Repair We See in Lewisville?
Spalled mortar joints and a cracked crown. Both trace back to North Texas clay soil and seasonal moisture swings that stress masonry. That kind of damage rarely requires a rebuild if it’s caught early. It almost always benefits from a fresh crown and repointing before the water gets to the flue tile. A sweep-and-inspection on a routine schedule is the way to find it early. This is exactly the reasoning behind our approach as the team at Lewisville Chimney Sweep: a sweep without an inspection misses the deterioration. Bringing both steps together in one visit is what keeps a small repair small. If you’re scheduling a sweep in Lewisville, a camera inspection on the same visit is the sensible inclusion, and you can ask for the inspection as a standalone service any time.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner installation cost in Lewisville?
A chimney liner installation in Lewisville typically costs $2,400 to $6,800 for a full stainless flexible liner. Price depends on flue height, flue size, appliance type, and how much labor the flue configuration requires. The written estimate sets your final price. Call (888) 424-2086 for a free estimate.
How much does a chimney rebuild cost in Lewisville?
Chimney rebuilds in Lewisville typically run $4,500 to $9,000 for a partial rebuild, and $9,000 to $14,000 for a full rebuild. The lower end covers crown and upper courses; the higher end covers a full stack tear-down and reline. Call (888) 424-2086 for a free estimate.
Is it cheaper to repair or replace a chimney flue?
Resurfacing (typically $1,800 to $3,600) is cheaper than a full liner replacement (typically $2,400 to $6,800) when the flue tile is cracked or pitted but structurally sound. If the tile is missing or delaminated, resurfacing won’t hold and the liner has to be replaced. A camera inspection tells the two apart. Call (888) 424-2086 for an inspection and a free estimate.
Can you come today for a chimney inspection or estimate?
Same-day service is available depending on the schedule. Call (888) 424-2086. We answer 24/7. Fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.
What does a HeatShield resurfacing cost compared to a liner?
HeatShield resurfacing in Lewisville typically costs $1,800 to $3,600, versus $2,400 to $6,800 for a stainless liner. Resurfacing is a specialized repair that restores the flue surface and draft without full liner replacement, and it’s one of the technically demanding repair methods available. Call (888) 424-2086 for a free estimate.
What Happens When You Call
We start with a sweep and a camera inspection, not a sales pitch. If the flue needs resurfacing, we’ll show you why; if it needs a DuraFlex liner, we’ll explain the spec and the sizing; if the crown is the problem and a rebuild isn’t necessary yet, we’d rather do the repair now than sell you a rebuild. The sweep, inspection, and repair all happen under one roof, and the technicians who do the work have up to 14 years of experience with HeatShield, DuraFlex, and the professional-grade materials that chimney specialists nationwide specify. You can read more about the full service lineup on the Lewisville Chimney Sweep home page. Then call us for a free estimate.
Call (888) 424-2086. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lewisville Chimney Sweep.
Pricing reflects the Lewisville market as of 2026. Lewisville Chimney Sweep offers free estimates – call (888) 424-2086.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Yolanda Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Novak"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Angela Tran