Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Lewisville?
Fireplace services in Lewisville typically cost $150 to $300 for a standard chimney sweep, $175 to $450 for a Level 2 camera inspection, and $250 to $1,800 for most repairs, with full liner replacement running $2,400 to $5,500. The written estimate sets the final price, and every one of those numbers depends on the flue, the fuel type, and what the inspection actually finds.
We’re Lewisville Chimney Sweep, and we handle the full sweep-to-repair cycle so you’re not bouncing between a cleaner, an inspector, and a repair contractor who each see a different part of the same system. Our technicians have up to 14 years of experience, we answer 24/7, and estimates are free. Call (888) 424-2086.
Fireplace Services Cost Breakdown (2026)
Here’s what the work actually runs in the Lewisville market this year. These are typical estimates, not quotes; the written estimate you get after we’ve looked at the flue is the number that counts.
| Service | Typical Estimate | What’s Included |
|---|---|---|
| Standard chimney sweep (wood-burning) | $150 – $300 | Full flue brushing, firebox and smoke shelf cleaning, creosote removal, basic visual check |
| Gas fireplace or insert cleaning | $125 – $250 | Burner and log set cleaning, venting check, combustion-air and draft observation |
| Level 1 inspection (visual) | $100 – $200 | Readily accessible portions of the firebox, flue, and exterior, no camera |
| Level 2 inspection (camera) | $175 – $450 | Video scan of the full flue, joints, offsets, and liner condition |
| Crown repair or rebuild | $400 – $1,400 | Cracked crown removal, re-pouring, bond break at the flue |
| Flue resurfacing (HeatShield) | $900 – $2,200 | Ceramic resurfacing of a damaged flue, restoring draft without full liner replacement |
| Relining with a flexible stainless liner (DuraFlex) | $2,400 – $5,500 | New liner sized to the appliance, insulation, top plate, and cap |
| Damper replacement | $300 – $800 | Top-sealing or throat damper removal and refit |
| Masonry repointing / spalling repair | $500 – $2,000 | Grinding out failed mortar joints, repacking, spot brick replacement |
| Chimney cap | $150 – $450 | Stainless or copper multi-flue cap, sized and sealed to the crown |
What moves the price up or down is almost never the sweep itself. It’s the diagnosis behind it. A flue that pulls clean and passes inspection sits at the bottom of these ranges. A flue with stage-two or stage-three creosote, a cracked crown, or a liner that’s failed at the joints pushes into the top of the range because the repair has to come before the chimney is safe to burn in again. Fuel type matters too: a gas insert is a quicker clean than a wood-burning firebox packed with glazed creosote, and a masonry chimney with an offset in the flue takes longer to scan than a straight run.
Liner replacement is the line item people ask about most, and it’s the one where getting the sizing right is the whole game. We work with a DuraFlex flexible stainless liner system sized to the appliance and the flue, not a generic drop-in, because an undersized liner that isn’t matched to the firebox will draft poorly and put you right back where you started.
What Affects Fireplace Services Pricing in Lewisville
- Creosote stage. Stage-one creosote is a light soot that brushes out during a standard sweep. Stage-two is glazed and harder to remove. Stage-three is a puffy, fuel-rich deposit that needs more aggressive removal before the flue can be considered safe. The further up the scale you are, the more time and material the job takes.
- Fuel type and appliance. Wood-burning fireplaces, gas inserts, and freestanding stoves each need a different approach. A wood firebox carries creosote and ash; a gas insert is cleaner but needs its venting and combustion checked. We scope each one on its own terms.
- Liner condition. A stainless liner in good shape is a quick scan. A damaged liner, or a flue that’s undersized for the appliance, opens the door to resurfacing with HeatShield or full relining with DuraFlex. This is the single biggest cost variable on the page.
- Masonry condition. North Texas summers and the temperature swings we get across a Lewisville year work on mortar joints over time. Spalling brick and failed joints get repointed before they turn into a structural problem, and the extent of the spalling sets the price.
- Access and height. A roof with a steep pitch or a chimney that’s tall and hard to reach takes longer to work on safely than a simple straight-up run. That’s labor, and it’s part of the estimate.
- Whether it’s sweep-only or sweep-to-repair. A sweeping visit and an inspection are not the same job. A sweep without an inspection misses hidden deterioration, so we connect both steps by default and the estimate reflects the full picture, not just the brushing.
How to Save on Fireplace Services
The most reliable way to keep fireplace costs down in Lewisville is to stay ahead of the creosote and catch small problems before they spread. A sweep at stage one is a routine, sub-$300 visit. Stage-three creosote or a failed liner is the repair that costs four figures. Timing the sweep to the end of your burning season, before creosote has had a whole year to harden, keeps you in the cheaper range.
Do the simple checks yourself. Keep an eye on the crown for cracks and the firebox for crumbling mortar, and make sure the cap is still seated. A damaged cap lets water and animals in, and water is what rots out masonry from the inside. If you burn wood, use dry, seasoned wood; green or wet wood builds creosote faster than anything else.
Get the inspection and the cleaning in the same visit rather than booking them separately. One trip, one scope, and you’re not paying to open the same chimney twice. Estimates are free, so call (888) 424-2086 and we’ll tell you what your fireplace actually needs before anyone touches it. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
When a repair is on the table, ask what material the fix uses and why. Our recommendations draw on a professional supply lineup that includes HeatShield for ceramic flue resurfacing, DuraFlex for flexible stainless liners, and products from Gelco, Olympia Chimney, Famco, and Copperfield. Knowing what’s actually available is what keeps a recommendation honest, and it’s what separates a repairable flue from one that genuinely needs replacing.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Lewisville?
A standard wood-burning chimney sweep in Lewisville typically runs $150 to $300, and a gas fireplace or insert cleaning runs $125 to $250. The written estimate sets the final price. Call (888) 424-2086 for an exact quote; estimates are free.
How much does a chimney inspection cost?
A Level 1 visual inspection typically costs $100 to $200, and a Level 2 camera inspection runs $175 to $450. A camera inspection is what reveals hidden liner and joint damage a visual check can’t see. We offer inspections as a standalone service, so call (888) 424-2086 to book one.
Is it cheaper to repair or replace a chimney liner?
Resurfacing is usually cheaper than replacing, and it can be the right call when the flue is otherwise sound. HeatShield ceramic flue resurfacing typically runs $900 to $2,200, while a full DuraFlex liner replacement runs $2,400 to $5,500. Whether resurfacing fits depends on the condition of the flue; a camera inspection tells us which way to go. Call (888) 424-2086 for an exact quote.
How much does fireplace repair cost in Lewisville?
Most repairs land between $250 and $1,800, depending on the component. Crown repair runs $400 to $1,400, a damper replacement $300 to $800, and masonry repointing $500 to $2,000. Liner work is the top of the range. Call (888) 424-2086 for a free estimate.
Can you fix my fireplace the same day?
Many repairs can be handled same-day, and sweeping and inspection are routine same-day visits. Anything that needs a new liner or a resurfaced flue gets scheduled once the material is on hand. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (888) 424-2086.
Contact Us for a Free Fireplace Estimate in Lewisville
Fireplace pricing comes down to what your flue is actually doing, and the only way to know that is to look. Our technicians have up to 14 years of experience, we handle sweep, inspection, and repair without handing you off to another contractor, and the estimate is free and written before any work starts. Call (888) 424-2086. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Lewisville market as of 2026. Lewisville Chimney Sweep offers free estimates – call (888) 424-2086.
Written by the team at Lewisville Chimney Sweep.
What Our Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Yolanda Vargas"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Neil Novak"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Angela Tran