Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Paloma Creek
If you live in Paloma Creek, the “chimney” on your house probably isn’t a brick stack. It’s a framed exterior chase with a factory metal flue bolted to a 2000s builder-grade home, and that changes how a sweep should be done. We work on that exact system across Paloma Creek, from the homes off US 380 to the streets near the Dallas North Tollway corridor. Our technicians have up to 14 years of experience, and we treat every visit as an appliance-ID check first and a cleaning second. Call (888) 424-2086 to book a sweep. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Paloma Creek Homeowners Call Lewisville Chimney Sweep for Chimney Sweep
Most of Paloma Creek was platted in the early 2000s as a master-planned subdivision, so nearly every house here has a prefabricated firebox and a factory flue instead of masonry. That’s the first thing we establish when we pull up: what appliance you actually have, and what the manufacturer lists for it. It sounds basic. It’s the step most basic brush-and-go services skip, and it’s where misidentified gas-log and direct-vent units turn into the wrong cleaning method.
Paloma Creek homeowners tend to call us because they’ve already Googled creosote stages or draft problems and want someone who can speak that language back. We bring inspection-grade diagnostics and repair-ready material knowledge, not just a brush. A sweep without an inspection misses hidden deterioration, so we connect both steps by default. You’ll see the camera findings and the photo report for yourself, and we’ll tell you plainly when work can safely wait. Every quote is a written flat price agreed before we book. Licenses, insurance and bonding are in place, and we work with your insurer if a repair is coming.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Paloma Creek
Chimney Services in Paloma Creek start with identifying your appliance, because a factory firebox, a direct-vent gas unit and a prefab wood-burning fireplace each take a different cleaning method and each has its own listed components. In these 2000s-to-2010s homes, the factory firebox, flue liner and termination cap are often original and now 15 to 25 years old. That age matters more than it looks from the living room. A typical sweep in Paloma Creek runs $180 to $320, with a Level 1 inspection included in most visits.
Brush cleaning to the manufacturer’s spec
Once the appliance is confirmed, we clean the flue to what its maker specifies, then check the damper, smoke chamber and cap. Expect soot and nests to show up here: the fireplace sits idle from roughly April through October, so deposits have five or six quiet months to settle in.

Chase cover and termination cap checks
The cap and chase cover take the brunt of North Texas summer UV and wind, and a bent cap or pulled flashing is common on original equipment this age. We check both as part of the sweep, because a loose cap lets water and nesting material straight into the flue.

Chimney Sweep Certified in Paloma Creek
Chimney Sweep Certified in Paloma Creek means a technician who can read the data plate on your factory firebox before touching it. Some of these boxes look like traditional wood-burning fireplaces but aren’t rated for wood at all. The first visit is as much an appliance check as a cleaning, and it’s the reason we book a certified sweep rather than a general handyman. Pricing for a certified sweep with inspection runs $180 to $320 in Paloma Creek, and a standalone Level 2 inspection runs $250 to $450.
What the first visit usually turns up
In builder-grade homes of this vintage, the first visit often finds a cap loosened by UV and wind, a chase cover with pulled flashing, or creosote that advanced while nothing was burning. A qualified local technician identifies direct-vent gas versus prefab wood-burning, cleans to spec, then reports what a Level 1 or Level 2 inspection shows.
Standalone inspections, not a sales pitch
We offer inspections as their own service, so you can book one without a cleaning attached. If a Paloma Creek home has never had the chase or flue opened up, a Level 2 with camera gives you documented evidence before anyone recommends liner work.
Trusted Brands We Service in Paloma Creek
When a repair is genuinely needed, the material matters as much as the labor. We work with professional-supply brands chimney specialists specify nationwide: a DuraFlex flexible liner system for a damaged or undersized flue, a HeatShield ceramic resurfacing process when the liner still has life in it, and Gelco or Olympia Chimney components where the factory parts no longer fit the job. HeatShield-familiar technicians can restore draft without a full liner replacement, which is a specialized repair most generalists don’t carry. We don’t stock parts on a truck. Instead, repair recommendations come from knowing what’s actually available and appropriate, so you’re not sold a replacement you don’t need. The sweep, inspection and repair stay under one roof, so you’re not coordinating between contractors.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Paloma Creek Homes
- A gas-log or direct-vent unit treated as wood-burning. Many Paloma Creek fireplaces look like traditional wood boxes but aren’t rated for wood, so the wrong cleaning method and wrong expectations get applied. The appliance-ID check comes first for exactly this reason.
- Original prefab flue and cap at end of service life. Cracks, a loose termination cap or a degraded chase cover rarely show from the living room. They turn up on inspection, which is why a sweep without one misses them.
- Creosote advancing through the idle season. Soot and creosote sit undisturbed from roughly April through October under attic heat and UV, and deposits can reach second- or third-degree glaze before a fall sweep gets booked.
- Summer UV and wind beating on the chase. North Texas sun and wind loosen caps and pull chase-cover flashing on these framed chases. That’s a water-intrusion problem waiting on the next hard rain.
Pricing for Chimney Sweep in Paloma Creek, TX
Pricing here is honest and specific. A typical annual sweep in Paloma Creek runs $180 to $320 and usually includes a Level 1 inspection. A standalone Level 1 inspection is about $120 to $200. A Level 2 inspection with camera runs $250 to $450. Creosote removal climbs with the stage: light soot sits at the low end, while second- or third-degree glaze takes more time and costs more. A prefab flue or firebox component repair typically runs $300 to $900, and a DuraFlex liner system for a damaged flue runs higher and is quoted per job. What drives cost is the appliance type, the deposit stage, and whether the cap or chase cover needs work. The written estimate sets the final price. Estimates are free, and nothing is recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Paloma Creek
Paloma Creek sits close to several communities we cover on the same schedule, including Oak Point and Hickory Creek to the south, Lake Dallas around the lake, and Corinth to the north. The housing stock shifts as you cross those lines, so the sweep changes with it. If you’re comparing what a sweep should cost nearby, our chimney sweep page lays out the full service. We cover Paloma Creek and the surrounding towns on the same booking.
Serving Paloma Creek, TX – Our Local Coverage Area
We serve Paloma Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Paloma Creek
Yes, it’s worth an inspection, because “nothing looks wrong” from the living room says nothing about a factory flue that’s now old enough to be near the end of its service life. On original prefab equipment, cracks and a loose cap or degraded chase cover only show up on inspection. Call (888) 424-2086 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
The data plate on the firebox and the vent termination tell you, and a technician confirms it before any brush goes in. It matters because each unit takes a different cleaning method and has its own listed components, and some gas-log boxes aren’t rated for wood at all. Call (888) 424-2086 and we’ll identify it on the first visit. Estimates are free.
Often yes, because a handful of fires still leaves creosote, and in Paloma Creek those deposits sit undisturbed from roughly April through October and advance while nothing is burning. A short burning season doesn’t reset the flue. Call (888) 424-2086 for an exact quote.
A Level 1 is a visual check of the accessible flue, firebox and cap, while a Level 2 adds a camera run through the flue and is the right call when the system is new to you, has changed, or a repair is being considered. For a 2000s prefab chase that’s never been opened up, Level 2 is usually the fit. Call (888) 424-2086 to book one.
No, third-degree creosote is glazed hard and a standard brush won’t take it off, so it needs a chemical or mechanical removal method suited to the deposit. That’s why we inspect the stage first and quote the removal to match. Call (888) 424-2086 for a free estimate.
If your Paloma Creek home has a factory fireplace that’s never been opened up, the best next step is a sweep with an inspection attached. Call (888) 424-2086 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get camera evidence you can see, a flat written price, and a straight answer on whether the work can wait.
Written by the team at Lewisville Chimney Sweep.