Chimney Inspection in Lewisville - Flat-Price Sweep, Photo Report Included

Trusted Chimney Inspection for Lewisville Homeowners

Creosote builds up quietly inside a chimney, and most homeowners in Lewisville never see it coming until a flue liner starts to crack or smoke rolls back into the living room. That’s exactly what an inspection is for: finding the problem before it becomes a fire risk or an expensive repair. We work with the same materials chimney engineers specify – DuraFlex flexible liner systems, HeatShield ceramic resurfacing, Gelco and Olympia Chimney components – so what we find and what we recommend line up with what the trade actually uses. Our technicians have up to 14 years of experience, and every inspection includes a camera and photo report you can look at yourself. Same-day visits are often available in Lewisville. Call (888) 424-2086 to book.

Call (888) 424-2086

Fireplace Inspection

Fireplace Inspection looks at the firebox, damper, smoke chamber and the visible part of the flue, not just the chimney exterior. It’s the right call when you’ve moved into a home with an unfamiliar fireplace, when a wood-burning unit starts smoking into the room, or when a gas insert hasn’t been opened up in years. We check the firebox for cracked brick and loose mortar, confirm the damper opens and closes cleanly, and look for gaps where creosote and heat can travel into the framing. Lewisville Chimney Sweep treats a fireplace inspection as a standalone service, not something bundled in as a sales pitch. A fireplace-only inspection typically runs $125-$250 in Lewisville; if you add a sweep at the same visit, expect $200-$380 combined. The written estimate sets the final price.

Firebox and Damper Check

The firebox takes the most direct heat of anything in the system, which is why firebrick cracks and mortar joints loosen over time. We check panel integrity, look for gaps behind the brick where heat can reach framing, and test the damper for smooth full travel. A damper that won’t seal lets conditioned air escape year-round and lets smoke back into the room when it’s open.

Gas Insert and Prefab Units

Gas inserts and factory-built fireplaces have their own venting, gaskets and clearances, and they need a different inspection than a masonry firebox. We confirm the vent termination is clear, check the glass and logs for sooting, and look at the surround for gaps. Gas work belongs in trained hands, so anything that touches the fuel line gets flagged for a qualified gas technician.

Chimney Inspection Services

Chimney Inspection Services cover the whole system from the firebox to the cap, and they’re the starting point whenever you don’t know the condition of a chimney. You need one after a chimney fire, before you buy a house, after visible cracking or water staining, or simply because no one has opened it up in a while. Lewisville Chimney Sweep offers inspection as its own service so you get a clear picture of what’s solid and what isn’t, with no pressure to buy repairs on the spot. Inspection-only visits usually run $125-$275 depending on how much camera work is needed; the estimate you get in writing is the price you pay. We serve homes across the Lewisville area and the communities around it.

Visual and Camera Together

A visual scan catches what’s accessible, and a camera catches what’s hidden. Doing both in one visit means you get a full picture from a single appointment instead of two. We photograph anything that looks marginal so you can judge it for yourself.

When a Sweep Comes First

Heavy creosote or soot has to come out before anyone can see the flue walls, so sometimes a sweep comes before the inspection. We’ll tell you up front when that’s the case and what it adds to the visit. Sweeping first also keeps the camera clean and the images usable.

Chimney Flue Inspection

Chimney Flue Inspection focuses on the liner itself, the passage your smoke travels through on every fire. It’s the part of the system most often missed and the one that matters most for chimney fire risk. The flue needs a close look whenever you see smoke stains around the thimble, notice bits of tile in the firebox, smell smoke in the house on cold days, or haven’t had it checked since a previous homeowner’s tenure. We run a camera down the full length of the flue to check for cracks, gaps between tiles, and missing mortar, then look at the liner material for the correct type and sizing. A flue inspection is typically included in a standard inspection; if you’re adding it separately, expect $100-$225. We work with DuraFlex and Olympia Chimney liner systems when a repair turns out to be necessary.

Liner Condition and Sizing

Cracked tile, separated joints and rusted steel liners are the three failure types we see most. Sizing matters too; an undersized flue drafts poorly, and an oversized one runs cold, which speeds up creosote formation. We measure and document what’s there so a repair recommendation matches reality.

Hidden Deterioration

The inside of a flue can look fine from the top and be failing behind the first bend. That’s why the camera runs the full length, not just the accessible top section. Photographs of what the camera sees go into your report.

Chimney Fire

Chimney Fire damage often hides behind creosote that’s already cooled, and the safest response is to stop using the fireplace and have the flue inspected before the next fire. Even a small fire inside the flue can crack tiles, warp a liner or loosen mortar without any visible damage from the living room. You need an inspection after a chimney fire, after a puffback, or if you’ve ever heard a low roaring sound from the flue and suspected a fire. We clean out what’s left, camera the full flue, and tell you plainly whether the system is safe to use or needs repair before you burn again. Post-fire inspections typically run $175-$375 depending on how much cleaning comes first; HeatShield resurfacing or a DuraFlex liner install is quoted separately if the flue needs it. Stop burning and give us a call before you light another fire.

What a Fire Leaves Behind

Burning creosote creates heat spikes that can crack fireclay tiles and pull mortar joints apart, plus a layer of glazed residue that’s hard to brush out. The residue matters because it feeds the next fire. A camera image is the only way to know how far the damage runs.

Why Timing Matters

Damage that’s small after a chimney fire can widen with each subsequent burn. Inspecting before the next season means you know exactly what you’re dealing with. Letting it sit is where the real risk builds. Call (888) 424-2086 and we’ll get you on the schedule.

Level 2 Chimney Inspection

Level 2 Chimney Inspection goes beyond the accessible surfaces and is the standard called for in more situations than homeowners realize: a home purchase, a change in fuel type or appliance, after a chimney fire or an earthquake, or whenever the chimney has visible damage. It includes everything in a basic visual check plus a camera run of the flue and a close look at the attic, crawlspace and any concealed sections where the chimney passes through framing. Lewisville Chimney Sweep performs Level 2 inspections with the same camera equipment we use on repairs, so no vulnerable spot gets skipped. Expect $175-$400 for a Level 2 in Lewisville depending on how many access points the house requires; a written estimate confirms the number before we start.

Access Points That Matter

Attics, crawlspaces and roofline transitions are where concealed damage hides. We ask about the home’s layout before we arrive so we know what to access. Then we photograph each location and note it in the report.

Documentation You Can Use

A Level 2 report should be something you can hand to a buyer, an insurer or a contractor and have it mean something. Ours includes photographs, the camera footage and a clear summary written in plain language. No jargon, no guesswork.

Chimney Leak

Chimney Leak problems usually start at the crown, the flashing or the mortar joints and work their way in, and Lewisville’s summer storms and humid stretches give them plenty of opportunity. You’ll see rust on a damper, water staining on the firebox walls, or white efflorescence on exterior brick. Sometimes you’ll smell a musty odor after rain rather than see anything at all. We trace the leak rather than guess: crown cracks, flashing separation, spalling brick and cracked mortar joints each need a different repair. Diagnosis and repair estimates typically run $150-$300 for the visit, with the repair quoted separately based on scope. We work with HeatShield and Gelco repair materials when the fix is inside the flue. Left alone, a small leak turns into a liner problem faster than most homeowners expect.

Tracing the Water Source

Water on the firebox floor doesn’t always mean the crown is the culprit. It can come down the flue, through the flashing or in through a side joint. We check each entry point in order before recommending a repair.

Repair Options That Fit

Crown sealing, flashing repair, a new rain cap and mortar repointing are all different scopes, and we quote the one that matches the actual leak. We don’t recommend a full rebuild when a crown repair will solve it. You’ll see photographs of the problem before you see the estimate.

Chimney Camera Inspection

Chimney Camera Inspection sends a video camera down the full length of the flue so we can see what a flashlight can’t reach. It’s the right tool whenever a visual check raises a question, before any liner work, after any suspected fire or leak, and on any flue that hasn’t been looked at in a while. The camera captures cracks in fireclay tile, gaps in mortar joints, offset flue sections and thimble connections in a way a top-down look misses. We record the footage and hand it to you along with a written summary, because a homeowner shouldn’t have to take our word for a $4,000 recommendation. A camera inspection typically runs $125-$275; when it’s part of a Level 2 it’s already included.

What the Camera Shows

Clear video picks up hairline cracks, spalling flue walls, and where a liner terminates. It also shows whether a prior repair is holding. We narrate as we record so you can follow along.

Footage You Keep

You get a copy of the video and the photographs, and they stay useful for years as a baseline. If you sell the home, having recent camera footage of the flue is worth having on hand. Insurers sometimes want it too.

Brands We Service

We work with DuraFlex flexible stainless liner systems and know where the joints and connectors wear first in a typical install. HeatShield ceramic flue resurfacing is one of the most technically demanding repair methods in the trade, and it’s a brand we know well enough to spec correctly for the flue it’s going into. Gelco repair components round out the lineup we use most.

Olympia Chimney parts see regular use in the liner and cap work we do, and we know which of their configurations fits a given flue. We aren’t a dealer and we don’t push one brand over another, because every chimney is a little different. Whether you have DuraFlex, HeatShield, Gelco or Olympia Chimney products on your system, or any other make, we can help.

Signs You Need a Pro Right Now

• Smoke rolling back into the room. A fireplace that won’t draft is telling you something is blocked or the flue is undersized or damaged. Don’t burn another fire until it’s checked.
• Strong smoky smell when the fireplace is cold. That’s usually creosote odor coming down the flue, and it’s often the first sign of a buildup problem. It’s worth a look before the heating season starts.
• Cracked or missing firebrick. Loose firebrick lets heat reach the steel behind it, and that heat transfer is what damages the firebox structure. Small cracks can grow quickly, so this is a check-it-now issue.
• Water staining or rust on the damper. Water in the firebox means a leak is already active. Left alone, it rusts steel components and softens mortar joints, and it makes the eventual repair larger.
• Bits of tile or mortar in the firebox. That debris fell from inside the flue, which means the liner is failing. It’s the strongest single sign that a camera inspection is overdue.

Our Process, Step by Step

1. 1
   Phone consultation and scheduling. We ask about your fireplace type, what you’ve noticed, and whether it’s wood-burning, gas or prefab. That tells us what to bring and how long to set aside. When something needs a same-day visit, we’ll tell you what’s available.
2. 2
   Exterior and interior walkthrough. We start outside at the crown, cap, flashing and brickwork, then move inside to the firebox, damper and hearth. Visible damage on either side shapes what we look at next.
3. 3
   Sweep before we probe. When creosote or soot is heavy, we clean first so the flue walls are actually visible. You can read about the cleaning side on our chimney sweep page.
4. 4
   Camera inspection of the full flue. A video camera runs from the top to the firebox, and we record what it sees. Every joint, every offset and every liner connection gets a look.
5. 5
   Photo report and written recommendation. You get the footage, the photographs and a plain-language summary of what needs attention now, what can wait, and what it will cost. Repairs are quoted separately and nothing gets started without your go-ahead.

How Much Does Chimney Inspection Cost in Lewisville?

Our Service Area Near Lewisville

We inspect chimneys across Lewisville and the surrounding communities, including Paloma Creek, Hickory Creek, The Colony and Highland Village, and out toward Flower Mound, Corinth, Oak Point, Lake Dallas and Lantana. Most of these are within a short drive, and when we’re scheduling an inspection in Paloma Creek or Hickory Creek, we can usually fit it in the same or next open slot. Fast dispatch runs 7am to 7pm, Sunday through Friday. If your home is on the edge of these areas, give us a call and we’ll confirm that we cover it.

Frequently Asked Questions About Chimney Inspection in Lewisville

Schedule Your Chimney Inspection Service in Lewisville Today

An inspection is the cheapest part of owning a chimney and the one that prevents the expensive ones. We’ll bring the camera, show you what we find, and tell you honestly what needs fixing and what can wait. Call (888) 424-2086. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.

Written by the team at Lewisville Chimney Sweep.