Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Hickory Creek, TX
We provide independent Gelco chimney cleaning and service across Hickory Creek, TX. What sets our Gelco work apart here is the lake: chimneys on the lake-facing side of town take more driving rain and year-round humidity than inland DFW suburbs, so we treat every Gelco sweep as a moisture inspection too. Creosote, rust, and storm-bruised crowns show up together in this town, and a cleaning that ignores that misses half the problem. Call (888) 424-2086 for a free estimate.
Why Hickory Creek Residents Choose Us for Gelco Service
Gelco systems have their own habits. The dampers stick after enough hard freezes. The direct-vent inserts rust when lake humidity sits on them all summer. A generalist sweep brushes the flue and leaves, but our technicians have up to 14 years of experience reading how these fireplaces actually fail.
We’re an independent Gelco service provider, not manufacturer-affiliated or authorized, and we say that plainly. What we do have is hands-on familiarity with Gelco fireboxes, caps, and dampers across Hickory Creek, plus the full sweep-to-repair cycle in one visit so you aren’t coordinating between contractors. When a damper linkage is warped or a crown has cracked, we fix it with quality parts that fit the unit you actually own.
Scheduling is straightforward. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the price before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Hickory Creek
These are the Gelco issues we run into most often in Hickory Creek, and each one ties back to how this town’s climate and housing treat a fireplace.
- Seized or warped damper linkage. Repeated 100°F summers followed by hard winter freezes work on Gelco damper hardware, especially on north-facing chimneys in The Legends where condensation lingers. A damper that won’t open fully is a draft problem and a safety problem at once.
- Glazed creosote on Gelco factory-built fireboxes. A winter of steady burning builds a hard, shiny layer that a standard brush won’t touch. Lake humidity compounds it by turning the soot acidic and corrosive, so glaze removal needs scraping, not just sweeping.
- Crown and flashing hail bruising. When the spring storm line rolls off Lake Lewisville, Gelco caps and surrounds take the hits. A cracked crown from a single 1-inch hailstone often announces itself when the first fall fire is lit and water starts finding its way in.
- Rust on direct-vent inserts and metal fireboxes. Year-round lake-effect moisture shows up as flaking paint or a damper that’s stuck shut. Direct-vent components are safety parts, so we use OEM Gelco components here rather than aftermarket substitutes.
- Waterlogged soot after storm season. A flue that was dry in March can be damp and acidic by June. We check for moisture intrusion alongside creosote removal so the next fire season doesn’t start on a compromised flue.
Gelco Service in Hickory Creek: What Local Conditions Mean for Your Equipment
Hickory Creek sits on the eastern shore of Lake Lewisville, and that position shapes the work more than anything else. Chimney exteriors on the lake-facing side take more driving rain and humidity than inland DFW suburbs, which means Gelco crown coatings and waterproofing here need to be checked for blistering and reapplication more often than the standard 3 – 5 year cycle. If you’re in Hickory Creek Estates and your chimney faces the water, treat the coating as a wear item, not a one-time job.
Add the housing stock to that picture. Many homes here went up from the late 1990s through the 2010s, brick-veneer two-story builds with factory-built fireplaces and direct-vent inserts. Those units need manufacturer-specific brush and vacuum tooling, and their metal components are exactly what lake humidity attacks. A Gelco direct-vent insert that runs fine in a dry inland suburb can develop flaking paint and a stuck damper here within a couple of seasons.
That’s why our Gelco cleaning in Hickory Creek pairs creosote removal with a moisture check, crown inspection, and a look at flashing after storm season. Sweep, inspect, and repair happen in the same visit.
Gelco Models & Products We Service in Hickory Creek
We service Gelco direct-vent gas fireplace inserts, Gelco factory-built wood-burning fireplaces, Gelco fireplace doors and accessory dampers, and Gelco multi-flue caps and top-mount dampers. That covers the whole system: the firebox, the flue above it, the cap on top, and the damper that controls the draft between them.
Parts choice matters as much as the repair. We use OEM Gelco dampers, caps, and firebox components when they’re available. For caps and flashing, quality aftermarket parts are a reasonable option. For direct-vent safety components, they aren’t, so we stay with OEM there. Our recommendations are based on knowing what’s actually available and appropriate for your unit, not on selling you a replacement you don’t need.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Hickory Creek
Pricing is set per job by a free written estimate. A standard Gelco sweep and inspection typically runs in the low-to-mid hundreds depending on the unit and how heavy the creosote is. Glaze removal, crown repair, and waterproofing are quoted separately once we’ve seen the condition of the system.
What drives the cost: the type of Gelco system, how accessible the chimney is, whether the damper needs repair, and whether a crown or flashing has storm damage. Our technicians have up to 14 years of experience, and the estimate is free. Nothing gets sold on guesswork.
A word on repair versus replacement. On Gelco fireboxes and dampers, repair is usually the honest call. If the firebox shell is cracked or rusted through, replacement is the right answer and we’ll tell you so directly. Call (888) 424-2086 for an exact quote.
Serving Hickory Creek, TX – Our Local Coverage Area
We serve Hickory Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Hickory Creek
It accelerates rust and corrosion on the metal firebox and damper, often showing as flaking paint or a damper that sticks shut. Year-round lake-effect moisture sits on the components between burns, so an annual moisture and corrosion check matters more here than in drier inland suburbs.
Damp soot and creosote release odors when humidity rises, and a stuck damper makes it worse by trapping air in the firebox. A sweep that removes the creosote and a damper check usually clears it. If the smell persists after cleaning, call us and we’ll look at the flue and cap.
A cracked crown lets water into the masonry and flue, which leads to rust, spalling, and deterioration over time. It won’t cause an immediate hazard, but it shouldn’t wait through a full storm season. We check crowns and flashing after the spring storm line and quote repairs honestly.
Once a year is a sound baseline for a home that burns wood regularly, and lake humidity makes the annual check more valuable here. Heavy burners may need it more often. Call (888) 424-2086 to book a sweep before the burning season starts.
Yes. Gelco damper linkages have their own fit and travel, and generic hardware often doesn’t seat or operate correctly. We use OEM Gelco damper components when available, and our technicians have up to 14 years of experience with this kind of repair. Call (888) 424-2086 for an estimate.
Service Areas Near Hickory Creek
Along with Hickory Creek, we work with homeowners in Lewisville, Paloma Creek, The Colony, and Highland Village. If you’re across the water in Lake Dallas or just north in Corinth, the same Gelco service is available. Our Gelco expertise covers the whole lake area.
Book Your Gelco Service in Hickory Creek Today
If your Gelco fireplace needs a sweep, an inspection, or a repair, we’ll give you a free estimate and a written price before any work starts. Call (888) 424-2086. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Lewisville Chimney Sweep.